36″ Stainless Steel Grab Bar – ADA Compliant
Includes:
-
1 × 36″ length, 1 ½″ diameter bar
-
6 × stainless steel mounting screws
Features:
-
♿ ADA & ANSI Compliant with 1 ½″ wall clearance
-
Supports up to 500 lbs. for maximum safety
-
Concealed screw design for a sleek, modern look
-
Twist-on flange covers with multiple anchoring points for easier installation
-
Mounting hardware included (6 × 2″ stainless steel screws)
-
Length measured centerline-to-centerline of mounting flanges. Add 3″ for overall length
Rear Wall Horizontal Grab Bar – 36″ Stainless Steel (ADA Guide)
Is this grab bar placement mandatory?
✅ Yes! The ADA requires a horizontal grab bar mounted on the rear wall behind the toilet.
How many do I need?
-
Only 1 rear wall grab bar is required.
What is the standard grab bar length?
-
The standard rear wall grab bar length is 36″.
What are the ADA grab bar placement requirements?
According to the 2010 ADA Standards for Accessible Design:
-
A 36″ (915 mm) minimum length grab bar is required.
-
Mounting height: 33″–36″ (840–915 mm) above the finished floor.
-
Extension requirements:
-
At least 12″ (305 mm) from the centerline of the toilet toward the side wall.
-
At least 24″ (610 mm) from the centerline of the toilet toward the open side.
-
Why this bar matters
-
Ensures ADA compliance.
-
Provides essential stability and safety for users transferring to and from the toilet.
-
Required for all accessible restrooms in public facilities.
✅ Recommendation: Always install at least a 36″ rear wall horizontal grab bar unless space constraints apply, in which case the 24″ alternative must be reinforced and centered.











Reviews
There are no reviews yet