Palmer Fixture® EcoTap Faucet Features & Benefits

• Creates a cleaner, clutter-free washroom experience
• Sensor-Activated (Automatic); Hygienically touchless operation,
• Adjustable Infrared Sensor Range: 4-3/4″±3/4″ (12cm ±2cm default)
• 110V/120V through 6 VDC Plug-In Adapter (Adapter included)
• Flow Volume: less than 1.0 GPM (3.81 LPM)
• Made of #304 stainless steel with a brushed (satin) finish
• Easy to clean and low maintenance
• Applicable Water Temperature: 39°F (4°C) to 185°F (85°C)
• Intelligent temperature control technology
• Color-Changing LED Indicating Sensor Activation & Error
• Operating Water Pressure: 10 to 100 PSI
• Standard deck opening diameter: 35mm
• Shut Off Delay Time: 0.5 to 1 Second
• Time Out Safety Feature: Auto Shut Off after 60 Seconds of Continuous Flow
• Time-Out Feature Automatically Resets
• CE Safety Approved
• ADA compliant when installed to the correct specifications
• Durable and vandal resistant
• Manufacturer’s 5 Year Warranty
• IP35 ingress protection against water
• Ground shipping included at no extra cost to anywhere in the Contiguous United States
• The AF0304-09 EcoTap Automatic Faucet is part of the EcoTap Trio, which includes the EcoTap Hand Dryer (HD0935-09) and EcoTap Soap Dispenser (SD1500-09) – each sold separately.  If installing two or more of the EcoTap Trio, a spacing of 7-1/16″ (18cm) is recommended between models (centerline to centerline).

The new ECOTAP AF0304-09 by Palmer Fixture is a deck-mounted, automatic faucet.  Mounted to the counter top surface and directly over the sink is an attractive, satin stainless steel spout. The bulk of the EcoTap Faucet apparatus (solenoid valve, water supply, AC adapter, electrical connections) is neatly concealed under the counter and designed for easy, quick disconnect for servicing.  The EcoTap Faucet requires the standard, counter top opening 35 mm (1-3/8″).  The faucet is sensor-activated. The sensitivity or range of faucet’s sensor is is self-adjusting within the range of 4-3/4″ (120mm) to 3/4″ (20mm).  There are no handles to turn or buttons to push.  When combined with the matching EcoTap Hand Dryer and Eco Tap Soap Dispenser, the entire hand washing & drying operation is hygienically touch-free.  When in standby mode, a pleasant blue light shines a solid circle on the round end of the spigot (see image below).  Once the presence of hands are detected, the blue circle turns to a solid red.  Once hands are removed, the water shuts off in 1/2 to 1 second – saving water waste.  After 60 seconds of continuous flow, the faucet will time-out as a safety feature…stopping the flow of water.  Once the sensor no longer detects an object within range, the time-out feature instantly resets itself.  The “over-the-sink” configuration of the complete EcoTap Trio saves valuable wall & floor space and keeps the floor dryer, safer, & more hygienic.

IMPORTANT PRE-INSTALLATION INFORMATION BOTH HERE AND IN INSTALLATION ILLUSTRATIONS ABOVE: While compatible with most sink types, the EcoTap should not be installed with sinks that do not meet a minimum depth of 118 mm (counter top surface to bottom of sink).  If sink is made of stainless steel, add an extra 50 mm to this dimension (128 mm).  Sinks with highly polished, reflective surfaces (e.g. bright chrome) are not recommended due to the interference with the infrared sensors.  If installing two or more of the EcoTap Trio models, a spacing of 7-1/16″ (18cm) is recommended between units (centerline to centerline).

PLEASE NOTE: Matching EcoTap High-Speed HAND DRYER (HD0935-09) & Automatic SOAP DISPENSER (SD1500-09) are also available (see INSTALLED images and separate listings respectively).

DIMENSIONS:
SPOUT: (Above the Counter): 6-11/16″ High x 1-31/32″ Wide x 8-21/32″ Deep  (170 mm x 50 mm x 220 mm)
WEIGHT: 2.64 lbs. (4.62 lbs. Boxed)
ELECTRICAL SPECS: 110V/120 Volts (50/60Hz) to a included 6V AC Adapter – INCLUDED (Only 0.1 Watt Standby Power)