• KOALA KARE® surface-mounted, vertical-folding, polypropylene baby changing station with stainless steel front panel (NEW model for 2022 / Never Available Before Now)
• Space-saving vertical orientation and sleek design allow for installation in even the smallest of wall spaces (only 20-3/4″ wide).
• While the KB301-SS is available in 2 Different Colors [Grey (01) and White Granite (05)] – This listing is for the KB301-05SS White Granite.
• Type 304 stainless steel veneer front panel with laser etched Koala logo integrates with other satin-finish accessories in the restroom.
• Exclusive to KOALA KARE® products, the bed surface contains Microban® antimicrobial additive permanently embedded into the plastic, reducing damaging & odor-causing microbial growth.
• Built to meet or exceed the stringent standards set by public and private regulatory agencies. Meets ASTM safety standards, plus ANSI & ADA requirements when properly installed.
• Steel-on-steel hinge mechanism with 11GA steel mounting supports meets ASTM and EN safety standards when properly installed.
• Built-in, locking, dual-cavity liner dispenser with integrated spring tab for “one-at-a-time” dispensing. Either cavity can dispense sanitary liners (KB150-99) and/or diaper disposal sacks (KB160).
• External (wall-mounted) stainless steel hook for bags or purses included (KB310-54).
• Includes an impervious TPU child safety strap (replaceable).
• Contoured changing surface area is a large 535 sq. in (3452 sq. cm).
• Easy to install using basic tools.
• Concealed gas spring / pneumatic cylinder mechanism ensures smooth, controlled opening and closing with a minimal amount of force.
• Backed by Manufacturer’s Five-Year Limited Warranty on Materials and Workmanship.
• UPS Ground included to anywhere in the contiguous (lower 48 states) United States.
• Usually ships the same business day payment is received.
• Made in the U.S.A.

The Koala Kare® KB301-05SS vertical baby changing station allows even restrooms with limited wall space to have a safe, sanitary, convenient way for caregivers to take care of their diaper-changing duties. If you’re looking for a premium-quality, vertical-folding baby changing table with a high-end look that won’t break the bank, look no further. The KB301-05SS is identical to the new, vertical-folding KB301-05 (which replaced the KB101-01), but with a front brushed stainless steel veneer panel added for a modern, stylish look. Plus, when you order from HandDryerUSA.com, you can enjoy the added benefit of knowing you’re getting the guaranteed lowest price of any internet-based retail dealer, as well as fast, free, and reliable shipping to anywhere in the contiguous 48 states of the U.S. and superb customer care for as long as you need. We strive to ship most items the same business day the order is received. We look forward to serving you. Feel free to contact us about any question

Dimensions:

• Width x Height: 20-3/4” x  35-7/8” (527 mm x 911 mm)
• Depth from Wall Surface (closed): 4” (101 mm)
• Depth from Wall Surface (open): 36-5/8” (931 mm)

Materials & Finish:

• Exterior: “White Granite” Polypropylene with Type 304 Brushed Stainless Steel Veneer
• Interior: “White Granite” Polypropylene with Microban® (exclusive to Koala®)
• Interior Chassis (Frame & Hinge Mechanism): 11GA Steel
• External Bag Hook (KB310-54): Solid Stainless Steel Rod (7/8″ diameter) with Brushed (No. 304) Finish

This newly designed, durable, attractive vertical-folding baby changing station (Koala Kare® KB301-05SS) is made of injection-molded, high-density polypropylene (WHITE GRANITE in color) with MICROBAN® antimicrobial additive permanently embedded into the plastic. The color “White Granite” is best described as very light gray with darker gray speckles.  It is easy to clean and resistant to odors and both fungal & bacterial growth. But unique to the Koala KB301-SS is the brushed (Type 304) Stainless Steel Veneer with a laser-engraved Koala logo on the front of the changing station (visible when folded closed). With this touch of stainless, it’s easier than ever to coordinate with other stainless steel restroom fixtures.  Graphics and safety messages are provided in four (4) different languages. In addition, a newly designed, built-in, locking, two-cavity dispenser for sanitary liners (KB150-99) and/or diaper disposal sacks (KB160) is conveniently located just above the changing surface when folded open. With the new integrated spring tab, only one-liner is dispensed at a time. The total capacity of the dispenser is approximately 50 liners if both cavities are used for liners. Neither liners nor diaper bags are included but are available for purchase.

The KB301-015SS is designed to be installed directly onto an existing wall surface using the included hardware. Six pre-drilled mounting holes in the back wall of the unit are designed for wood screws (provided) into wood studs on 16″ centers. For installation on walls that do not have wood studs 16″ on center or metal studs or concrete block, specialized fasteners or toggle fasteners may need to be obtained by the owner locally. Installation instructions (provided) address these different wall materials/scenarios. The station folds down vertically so that the infant is lying perpendicular to the wall (head near the wall and feet out from the wall).  With a reinforced steel-on-steel hinge running the full length of the station and with an 11-gauge steel mounting chassis, the KB301-05SS meets all ASTM requirements for static load performance when properly installed. Although designed for infants that weigh no more than 50 lbs., in testing the KB301-05SS easily supported 200 lbs. with minimal deflection of the “bed” from horizontal. A pneumatic cylinder provides for easy, slow, and controlled opening and closing of the bed. Both the pneumatic cylinder and metal hinge mechanism are fully concealed (regardless of bed position) to eliminate tampering and possible pinch hazards.

The contoured changing surface area is 535 sq. in. (3452 sq. cm) and comes complete with an impervious, replaceable thermoplastic polyurethane (TPU) safety strap. Made from a solid stainless steel rod (7/8 in dia.), an external bag hook (KB310-54) is provided to mount on the wall next to the changing station, allowing for safe storage and easy access to a purse or diaper bag. When open the changer extends out from the wall face 36-5/8” (931 mm). When properly installed, this changer complies with the highest Americans with Disabilities Act (ADA), American National Standards Institute (ANSI), and Texas Accessibility Standards (TAS) regulations.