Product Resources (Downloads)
Features & Benefits
- Dries hands fast and hygienically – The Dyson Airblade HU02 uses powerful sheets of clean, HEPA-filtered air to dry hands in just 12 seconds. Each unit removes 99.97% of bacteria and particles as small as 0.3 microns, helping to create a more hygienic restroom experience.
- Slim, modern, and ADA compliant – At only 4 inches thick, the HU02 fits easily into any commercial restroom layout and meets the 4" ADA protrusion rule without needing a recess kit, keeping installation simple and affordable.
- Energy-efficient, low running costs, and sustainable performance – Powered by Dyson's digital V4 brushless motor, the HU02 runs at just 1,000 watts, using up to 69% less energy than traditional hand dryers. The Dyson Airblade HU02 costs up to 98% less to operate than paper towels and contributes to LEED certification, making it a smart, eco-friendly choice for modern facilities.
- Touch-free and durable – The touchless infrared sensor activation and antimicrobial-coated casing reduce the spread of germs. Its tough polycarbonate construction stands up to years of daily use.
- Perfect for high-traffic restrooms – Ideal for office buildings, restaurants, hotels, healthcare facilities, schools, airports, retail centers, fitness clubs, and other commercial spaces that need a durable, touch-free, and hygienic hand drying solution.
Cost Savings: Curious how much your facility could save by switching to the Dyson Airblade HU02? Try the official Dyson Savings Calculator to see your potential cost and energy savings.
Hardwired Installation
This product is intended for hardwired installation only. It does not include or support a standard wall plug.
Touchless Operation
This product is designed for hands-free operation, helping to reduce cross-contamination and prevent germ spread.
ADA Compliant
This product meets all criteria established by the Americans with Disabilities Act (ADA) when mounted at the proper height and location.
U.S. Green Building Council (USGBC)
This product helps earn LEED credits. Dyson is a USGBC member, supporting sustainable building practices that conserve energy and reduce waste.
NSF Certified
This product has been audited and certified by NSF International to meet rigorous standards on public health and safety.
Installation Guide: Replacing an existing HU02 hand dryer? Learn how to remove the old unit and install the new one in under 3 minutes. If it’s a new installation, watch the full step-by-step guide to ensure your Dyson Airblade HU02 is mounted and wired correctly the first time. Product package includes a backplate mounting bracket for easy installation and replacements.
Technical Specifications
| Electrical | |
|---|---|
| Input Voltage | Low voltage: 100–120V / High voltage: 200–240V |
| Frequency | 100–115V at 50/60Hz; >115–120V at 60Hz; 200–240V at 50/60Hz |
| Standby Power Consumption | Less than 0.5W |
| Motor Type | 1000W, digital V4 brushless motor |
| Motor Speed | 83,000 rpm |
| Motor Switching Rate | 5,500 per second |
| Electrical Code Reference | Dedicated hand dryer circuit required (NEC/local) |
| Electrical Load | 9.0A @ 110V / 4.54A @ 220V |
| Heater Type | None |
| Construction | |
| Cover Material | Polycarbonate |
| Backplate Material | ABS/PBT Plastic |
| Exterior Screw Type | Anti-tamper ¼” (4mm) Pin-Hex |
| Water Ingress Protection | IP24 |
| Net Weight | 6.32 lbs / 2.86 kg |
| Unit Dimensions | 9-1/4 W x 15-1/2 H x 4 D |
| Filter | |
| Filter Type | Sealed HEPA filter (glass fiber and fleece pre-layer) |
| Filtration Efficiency | Captures 99.97% of particles ≥ 0.3 microns |
| Operation | |
| Activation Method | Touch-free capacitive sensor |
| Dry Time | 12 seconds (NSF P335 test, 0.1g residual moisture) |
| Sound Power Level | 79 dB(A) |
| Sound Pressure Level @2m | 63 dB(A) |
| Operation Lockout Period | 30 seconds |
| Airspeed at Aperture | 420 mph (Low voltage) / 430 mph (High voltage) |
| Maximum Altitude | 9,842 ft / 3,000 meters |
| Operating Airflow | Up to 5.3 gal/sec or up to 42.38 CFM |
| Operating Temperature Range | 32–104°F / 0–40°C |
| Logistics | |
| Unit Barcode (Sprayed Nickel) | 885609009933 (Low) / 885609009797 (High) |
| Part Number | 307174-01 (Low) / 307172-01 (High) |
| Packaged Weight | 9.52 lbs / 4.32 kg |
| Packaged Dimensions | Height 5½" × Width 17⅞" × Depth 10¾" |
| Standard Warranty | |
| Warranty | 5-year parts (self-service) |
| Accreditations | |
| Certifications | Carbon Trust, NSF International |
| Compliance | ADA Compliant |
| Environmental | Contributes to LEED credits and WELL Building Standard™ Feature W08 |
Verified owner Thomas S. (verified owner) –
Verified owner sam odom (verified owner) –